Parent Unit Power Supply - Motorola MBP622 User Manual

2. Place the battery cover over the compartment and gently tighten the
screw in a clockwise direction using a small cross-head or flat-head
screwdriver.
2.3

Parent Unit Power Supply

IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the Parent Unit to operate on battery in the event
of a power failure, or when moving to a different room.
1. Insert the small plug of the Power Adapter into the socket in the side of the
Parent Unit and plug the other end into a suitable electrical outlet. Only use
the enclosed Power Adapter (6V DC/500mA) with the slightly smaller DC
plug.
2. Press and hold the POWER ON/OFF button
Unit to turn in ON.
3. Once the Baby and Parent Units are both switched ON, the display on the
Parent Unit will show the video captured by the Baby Unit.
Getting Started
Small cross-head or flat-head
screwdriver.
P
on the side of the Parent
11