Switching Display Pattern; Checking Copyright Information - Alpine HDA-5460 Owner's Manual

Switching Display Pattern

Select your favorite display pattern.
1
Press DISP to select the desired display pattern.
No. Content
1 Main display *1
2 Main display + screen saver display
3 Screen saver display
4 Visualizer display 1: Lightening
5 Visualizer display 2: Globe
6 Visualizer display 3: Flash
7 Normal spectrum analyzer display
8 OFF
*1 Only when selecting the HDD source.
• If "No. 8 OFF" is selected, pressing a switch temporarily turns the
display on for 5 seconds and then it turns off.
• When combined with a head unit that is not Ai-NET compatible,
"No. 7 Normal spectrum analyzer display" is not available for any
of the head unit's sources.
• When the Input RCA Connectors are not connected, "No.7 Normal
spectrum analyzer display" is not available for any of the head
unit's sources.
• Pressing DISP in the menu mode will cancel the menu mode.
Display No.1 and No.2
No.1 and No.2 display patterns present the following
information:
No.1 Main display
(ALBUM NAME)
(ARTIST NAME)
(SONG TITLE)
(ELAPSED TIME/SAMPLING RATE/ BIT RATE)
No.2 Main display + screen saver display
(ALBUM NAME)
(ARTIST NAME)
(SONG TITLE)
(ELAPSED TIME/SAMPLING RATE/ BIT RATE)
• Up to 64 one-byte characters can be displayed for a song title, etc.,
but are not displayed on the head unit.
• The text is displayed line by line which is scrolled automatically.
• When a text cannot be displayed on the unit, "NO SUPPORT" is
displayed.
10
-EN

Checking Copyright Information

1
2
*1
3
• Pressing MENU will return to the previous display.
(screen saver)
Press MENU in the HDD mode to select the menu
mode.
Move the UP/DOWN lever upward or downward
to highlight Information in the display. Press the
Rotary encoder to make the selection.
The copyright information is displayed.
Press the Rotary encoder to end the operation.