Repeat Play; Deleting An Hdd File - Alpine HDA-5460 Owner's Manual

Repeat Play

Playback repeatedly, a single file or a group of files of your choice.
1
Press and hold MENU for at least 2 seconds to
select the Play mode.
2
Turn the Rotary encoder to highlight Repeat in
the display. Press the Rotary encoder to make
your selection.
3
Turn the Rotary encoder to highlight the desired
Repeat mode. Press the Rotary encoder to make
your selection.
SONG REPEAT:
Play only one file repeatedly.
ALBUM REPEAT:
Play only the files under the Album category
repeatedly.
ARTIST REPEAT:
Play only the files under the Artist category repeatedly.
4
To cancel REPEAT, access the Play Mode again to
select the "PLAY MODE OFF". Then press the
Rotary encoder .
• Setting the REPEAT mode during SCAN or M.I.X. play will cancel
the SCAN/M.I.X. mode.
• Pressing MENU on the Play Mode selection screen will return to
the previous operation.
• In the REPEAT mode during playback of a playlist, the REPEAT
operation is only performed within the playlist, so there is no
operation 3 above.
8
-EN

Deleting an HDD File

You can delete an HDD file. The deleted file cannot be recovered.
1
Press MENU in the HDD mode to select the menu
mode.
2
Move the UP/DOWN lever upward or downward
to highlight Delete in the display. Press the Rotary
encoder to make the selection.
3
Turn the Rotary encoder to highlight the
category, ALBUM/ARTIST/SONG, containing the file
to be deleted. Press the Rotary encoder to make
the selection.
Select PLAYLIST to delete the PLAYLIST file.
4
Turn the Rotary encoder to highlight a title.
Press the Rotary encoder to make the selection.
Select the song title in the same way when ALBUM/
ARTIST is selected.
5
Turn the Rotary encoder to highlight "OK" in the
display. Press the Rotary encoder to confirm
deletion.
The selected file is deleted.
Select "CANCEL" to return to normal mode without
deleting the file.
6
When the completion message is displayed, press
the Rotary encoder to return to normal mode.
• Pressing MENU in the Delete mode will return to the previous
operation.
• Make sure not to eject HDD or turn off the power when the data is
being deleted.
• When the file is deleted, the File No. is rearranged automatically
with the remaining files.
• The Delete mode can not be selected when HDD is not loaded.