Page 1
SERVICE MANUAL HDD PLAYER ACCESS 7 / 03-A 68E35662S01 HDA-5460...
Page 2
<Cautions for Safe Repair Work> The following cautions will prevent accidents in the workplace and will ensure safe products. *The symbols indicate caution is needed to prevent injuries and damage to property. The symbols and their meanings follow. If you ignore this symbol and handle the product incorrectly or unsafely, Warning serious injury or death may result.
HDA-5460 Extension Cable Front ASSY,MAIN PWB CB3001 Rear Expansion HDD EXT. Cable 20P (01V35647S01) ASSY,HDD UNIT CB304 It fixes to a chassis using the wire binder of attachment on a cable.
Page 20
HDA-5460 IC550 Usually/ ACC-off or FRONT unit remove Usually/Hot temperature environment or test mode Power on/Power off Usually/ 0/PS Usually/ACC-off or When a buzzer sounds power-off or FRONT unit remove ACC-ON and Usually/ACC-off or power off FRONT unit an attachment...
Page 22
HDA-5460 IC901 20MHz 20MHz 20MHz Key A/D state in Rotary encoder state Rotary encoder state Self return encoder in / It is set to 0V at the time of lower position. HDD mode/other mode PS/0 No dimmer state/dimmer IC902 20MHz...
Page 25
HDA-5460 PP5002 : IC307 Symbol Terminal Description A. TXD Transmit data output terminal to MAIN u-COM. No connect terminal. A. RXD Receive data input terminal from MAIN u-COM. No connect terminal. Power supply terminal. (3.3V) GND connect terminal. XM2_ MD00...
Page 26
HDA-5460 Symbol Terminal Description NC(PULL-DOWN) Pull-down connect terminal. /STBY STANBY signal input terminal from MAIN u-COM GND connect terminal. VCC1 Power supply terminal. (1.8V) XM2_ MA15 Address output terminal. (SDRAM, ROM) XM2_ MA16 XM2_ MA17 Address output terminal. (ROM) XM2_ MA18...
Page 27
HDA-5460 Symbol Terminal Description RTCK(NC) No connect terminal. XM2_ CKE CKE signal output terminal. (SDRAM) GND connect terminal. VCC2 Power supply terminal. (1.8V) RESET Reset input teminal. NC(PULL-DOWN) Pull-down connect terminal. No connect terminal. NC(PULL-DOWN) Pull-down connect terminal. SPDIF_ CLK Clock signal input terminal.
Page 29
HDA-5460 Symbol Terminal Description F-START Communication start control signal output terminal to FRONT u-COM. F-RESET RESET control signal output terminal to FRONT u-COM. F-SI Data input terminal from FRONT u-COM. F-SO Data output terminal to FRONT u-COM. F-CLK Clock input terminal from FRONT u-COM.
Page 30
HDA-5460 Symbol Terminal Description VHH-ON Power control signal output terminal for OELD. HDD+B Power control signal output terminal for HDD. MS+B Power control signal output terminal for MS. DC-DC-ON DC-DC power control signal output terminal. A-MUTE AUDIO MUTE control signal output terminal.
Page 31
HDA-5460 D70F3033BGC : IC901 Symbol Terminal Description No connect terminal. VHH-CONT2 Power control signal output terminal for OELD. FRONT-SO Data input terminal from MAIN u-COM. FRONT-SI Data output terminal to MAIN u-COM. FRONT-CLK Colck output terminal to MAIN u-COM. Power supply terminal.
Page 32
HDA-5460 Symbol Terminal Description I/O Data treminal for Outer graphic ROM. BVDD Power supply terminal. BVSS GND connect terminal. AD10 AD11 Data treminal for Outer graphic ROM. AD12 AD13 AD14 AD15 Address treminal for Outer graphic ROM. AVDD Power supply terminal of A/D converter.
Page 34
HDA-5460 Cabinet Assembly Parts List 55 07D00749K02 BKT,SIDE R 56 03S44205G41 SCR,T-TITEM2.6X4 BLK Note : The part that has not PART NUMBER will not be supplied. 01V66330Y65 ASSY,NOSE UNIT 5460A - - - - - - - - - - -...