MTU 8 V 2000 M40A Operating Instructions Manual page 193

Engine oil
Part No.:
Qty.:
Used in: 6.3.1 Crankcase breather – Oil separator element replacement, diaphragm check and
replacement (→ Page 110)
Qty.:
Used in: 6.7.1 HP fuel line – Pressure pipe union replacement (→ Page 128)
Qty.:
Used in: 6.13.2 Engine oil – Change (→ Page 147)
Qty.:
Used in: 6.14.2 Engine oil filter – Replacement (→ Page 149)
Fuel
Part No.:
Qty.:
Used in: 6.3.2 Crankcase breather – Cleaning oil separator element (→ Page 112)
Grease (Kluthe Hakuform 30-10/Emulgier)
Part No.: X00029933
Qty.:
Used in: 6.5.2 Injection pump – Removal and installation (→ Page 120)
Qty.: 1
Used in: 6.6.2 Injector – Removal and installation (→ Page 124)
Qty.:
Used in: 6.7.1 HP fuel line – Pressure pipe union replacement (→ Page 128)
Isopropyl alcohol
Part No.: X00058037
Qty.: 1
Used in: 6.20.1 Engine wiring – Check (→ Page 172)
Isopropyl alcohol
Part No.: 46181
Qty.: 1
Used in: 6.21.1 Engine control unit and connectors – Cleaning (→ Page 173)
Qty.: 1
Used in: 6.21.2 Engine monitoring unit and connectors – Cleaning (→ Page 174)
Qty.: 1
Used in: 6.22.1 LOP and connectors – Cleaning (→ Page 180)
MS150031/03E 2011-10 | Appendix B | 193