MTU 8 V 2000 M40A Operating Instructions Manual page 103

Display text Meaning
TD P-Lube Oil Different measurement values trans‐
mitted by the two sensors for lube-oil
pressure measurement
TD T-Coolant Different measurement values trans‐
mitted by the two sensors for coolant
temperature measurement
Cylinder Cutout Measuring point "Cylinder Cutout"
Task
1. Check LOP visually (→ Page 181).
2. Perform LOP test procedures
(→ Page 183).
3. Check ECU plug-in connections
(→ Page 176).
4. Check engine wiring (→ Page 172).
5. Contact Service
• Have sensors checked and re‐
placed, if required.
1. Check LOP visually (→ Page 181).
2. Perform LOP test procedures
(→ Page 183).
3. Check ECU plug-in connections
(→ Page 176).
4. Check engine wiring (→ Page 172).
5. Contact Service
• Have sensors checked and re‐
placed, if required.
Status message of 'Cylinder cutout /
half of cylinders running' mode in idle
operation.
MS150031/03E 2011-10 | Troubleshooting | 103