Table of Contents
Advertisement
Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select
SYSTEM and press the SELECT button. Another dialog box
VIDEO SYSTEM Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to "Auto", and then press the SELECT
button.
VIDEO SIGNAL FROM VIDEO JACK OR S-VIDEO JACK
Auto
The projector automatically detects the incoming Video system, and
adjusts itself to optimize its performance.
When the Video System is PAL-M or PAL-N, select the system
manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce the proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Auto
The projector automatically detects the incoming Video signal, and
adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce the proper video image, it is
necessary to select a specific component video signal format among
480i, 575i, 480p, 575p, 720p, 1035i and 1080i.
SELECTING COLOR SYSTEM
VIDEO SIGNAL FROM Y, Pb/Cb, Pr/Cr JACKS
VIDEO MODE
This box indicates the
system being selected.
Move the arrow to
the Mode and press
the SELECT button.
This box indicates the
system being selected.
Move the arrow to
the Mode and press
the SELECT button.
33
Advertisement
Table of Contents
