Table of Contents
Advertisement
CONNECTING THE PROJECTOR
This projector uses a micro processor to control the
unit. Occasionally, the micro processor may
malfunction and need to be reset. This can be done
by pressing the RESET button with a pen, which will
shut down and restart the unit. Do not use the
RESET function excessively.
monitor OUT
COMPUTER MONITOR OUTPUT
JACKS (BNC x 5)
These jacks output the signal from
the COMPUTER INPUT terminals
(except the digital input signal).
Connect an external monitor to
these jacks. (Refer to P14.)
12
OUTPUT TERMINALS
RESET BUTTON
R
G
B
H
AUDIO OUTPUT JACKS
Connect an external audio
amplifier to these jacks.
(Refer to P13, 14.)
When using the Wired / Wireless
Remote Control Unit as the Wired
Remote Control, Connect the Wired
Remote Control Unit to this jack with
the Remote Control Cable (supplied).
(Refer to page 21.)
R–audio–L
V
reset
R/C jack
VIDEO MONITOR OUTPUT JACK
This terminal outputs the composite video
signal or the signal from the S-VIDEO
INPUT JACK. Connect an external
monitor to this jack. (Refer to P13.)
R/C JACK
video
Advertisement
Table of Contents
