Picture Image Adjustment - Ask Proxima 9280 User Manual

VIDEO MODE
Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select IMAGE
and press the SELECT button. Another dialog box PICTURE
IMAGE ADJUSTMENT Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to the function that you want to select
and then press SELECT button.
Standard
Normal picture level preset on this projector. This picture level can
be set by pressing the NORMAL button.
Cinema
Picture level adjusted for the picture with fine tone.
Custom
Picture level adjusted manually in the custom setting dialog box.
When selecting " ," the custom setting dialog box will appear. Move
the arrow to the item that you want to change by pressing the POINT
UP/DOWN button, and adjust each value or change the setting On or
Off by pressing the SELECT button to match with the image.
Color
Point to button to lighten the image, and select
image. (From 0 to 63.)
Tint
Point to button to increase purple, and select
(From 0 to 63.)
White balance (Red / Green / Blue)
Move the arrow to the color that you want to adjust. Point to
lighten the color and select
Contrast
Point to button to decrease contrast, and select
contrast. (From 0 to 63.)
Brightness
Point to button to darken the image, and select
image. (From 0 to 63.)
Sharpness
Point to button to soften the image, and select
image. (From 0 to 31.)
Noise reduction
Set "On" to reduce the noise (rough parts) of the image
Progressive
Set "On" to provide progressive scan mode.
Each of the keys operates as follow.
Reset
Recalls the data previously adjusted.
Stored
Stores the data in the memory.
Quit
Closes the PICTURE IMAGE ADJUSTMENT Menu.
34

PICTURE IMAGE ADJUSTMENT

to deepen the
to increase green.
to deepen the color. (From 0 to 63.)
to brighten the
to sharpen the
The level being selected.
to
to increase
.
Closes the PICTURE
IMAGE ADJUSTMENT
Menu.
NOTE : The Noise Reduction cannot be operated
when the video signal is from the Y,
Pb/Cb, Pr/Cr jacks.
The Progressive cannot be operated when
"480p," "575p," "720p," "1035i," "1080i-50"
or "1080i-60" is selected on the SYSTEM
MENU (P33).
Move the arrow to the item
and press the SELECT
button.
Press the SELECT button
at " " to adjust the picture
level manually.
Move the arrow to
or and press
SELECT button.
Press the SELECT but-
ton to set the function
"On" or "Off."