M.T.H. Premier 2-4-1A Operator's Manual page 7

- Attach the proto-coupler to rear tender truck as shown.
- Plug the Proto-Coupler to the black connector provided.
- Reconnect the wire harness between the tender chassis and the tender shell.
- Reattach the tender shell. Remember that the front step piece goes under the chassis.
When power is applied to the engine the Proto-Coupler can be operated anywhere on
the layout. To operate the coupler in the command mode, press the rear coupler button
on the DCS remote each time you want the coupler to open.
To operate the coupler in the conventional mode, the coupler can be opened by quickly
pressing the Bell Button and Horn Button (1 Bell and 3 Horns) on a Z-4000 or
compatible Toy Train Transformer. Refer to the Proto-Sound 3.0 Operating
Instructions on page 30.
Premier 2-4-1A Mountain Steam Locomotive
7