7.17 HeART RATe HANDlebAR RePlACeMeNT
1) remove the seat pad as outlined in Section 7.15.
2) remove the back pad as outlined in Section 7.16.
3) remove the 4 screws attaching the heart rate handlebar to the upper seat frame (Figure A).
4) Disconnect the 2 wires coming through the lower seat frame to the heart rate handlebar and remove it (Figure B).
5) reverse Steps 1-4 to install a new heart rate handlebar.
6) test the bike for function as outlined in Section 7.23.
44
CHAPTeR 7: PART RePlACeMeNT GUiDe
fiGURe A
fiGURe b