Console Replacement - Vision Fitness R70 Service Manual

7.2 CoNSole RePlACeMeNT

1) remove the 4 screws holding the console to the console mast (Figure A).
2) Disconnect the 3 wire connections to the console (Figure B).
fiGURe A
3) remove the console (Figure C).
4) reverse Steps 1-3 to install a new console. NOTE: when installing the new console, 2 wires coming up the console mast will not be used
unless a tV bracket is installed on the unit (FIgure D).
fiGURe C
5) test the bike for function as outlined in Section 7.23.
26
CHAPTeR 7: PART RePlACeMeNT GUiDe
fiGURe b
fiGURe D