Ring
(Part
No. 257137-6)
When cutting groove
1/4", 5/16",
3/8",
7/16", 1/2", 9/16"
or
5/8", use this ring
or rings.
Table insert
(Part
No.
343396-9)
When cutting grooves 9/16" or wider, use
this table insert instead of the standard
table insert.
Table saw stand
(Part
No.
STEX 122251
1
Place the stays on a level location and
assemble the legs inside. Secure with the
bolts and nuts, then attach the rubber caps
to the ends of the legs.
Now set the table saw on top of the as-
sembled stand and secure with four bolts,
washers and nuts.
29