Hand Tool Storage Pocket; Adjusting Depth Of Cut - Makita ARBOR 2711 Instruction Manual

Hand tool storage pocket
The table saw comes with a hand tool
storage pocket in the base. Keep wrenches,
screwdriver, etc. in this pocket.
Adjusting depth of cut
The depth of cut may be adjusted by turn-
ing the knob. Turn the knob clockwise
to raise the blade or counterclockwise to
lower it. The depth
of
cut
i s
indicated on
the scale by the pointer (A).
If the knob does not turn easily, loosen the
two adjusting screws on the inside of the
table saw counterclockwise. If the knob is
loose enough to be turned by vibration,
tighten the adjusting screws clockwise.
I
1
14