Assembly; Movement And Transport Of Table Saw; Installing Ruler Guides - Makita ARBOR 2711 Instruction Manual

255 mm (10") table saw with electric brake
Hide thumbs Also See for ARBOR 2711:
Table of Contents

Advertisement

Movement and transport of table saw
Before moving the table saw, tighten the
wing bolt to secure the sliding table.
When moving the table saw, hold
it
by the
fixed table and the bars.
Be sure to use two persons to lift and move
it. When transporting the table saw by
vehicle, secure it with a rope or other sub-
stantial means.
ASSEMBLY
The table saw is shipped from the factory with the ruler guides, miter gauge, saw blade,
rip fence, blade guard and table insert not installed. Assemble
as follows.
CAUTION
:
Always be sure that the tool is switched off and unplugged before assembly.
Installing ruler guides
Sliding fable
Fixed fable
Install the graduated ruler guide on the
front side of the fixed table and the non-
graduated one
on the
rear
side.
Use the hex
wrench to tighten the bolts.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents