EC Declaration of Conformity from sockets without earth wire. For European countries only Noise Makita declares that the following Machine(s): Designation of Machine: Circular Saw The typical A-weighted noise level determined accord- Model No./ Type: M5802 ing to EN60745:...
Maintain a firm grip with both hands on the Save all warnings and instruc- saw and position your arms to resist kickback tions for future reference. forces. Position your body to either side of the The term "power tool" in the warnings refers to your blade, but not in line with the blade. Kickback mains-operated (corded) power tool or battery-operated could cause the saw to jump backwards, but...
damaged parts, gummy deposits, or a build-up of SAVE THESE INSTRUCTIONS. debris. Lower guard may be retracted manually only WARNING: DO NOT let comfort or familiarity for special cuts such as “plunge cuts” and with product (gained from repeated use) replace “compound cuts”. Raise lower guard by strict adherence to safety rules for the subject retracting handle and as soon as blade enters product.
6. Ring tool. CAUTION: WARNING: Use only the Makita wrench to BE SURE TO TIGHTEN THE HEX install or remove the circular saw blade. BOLT CLOCKWISE SECURELY. Also be careful not to tighten the bolt forcibly. Slipping your hand To remove the circular saw blade, press the shaft lock from the hex wrench can cause a personal injury.
When you wish to perform clean cutting operation, system. A dirty guarding system may limit the proper connect a Makita vacuum cleaner to your tool. Connect operation which could result in serious personal a hose of the vacuum cleaner to the dust nozzle as injury. The most effective way to accomplish this...