Raise And Lower Monitor Screen - NEC MultiSync LCD2470WNX User Manual

Raise and Lower Monitor Screen

The monitor may be raised or lowered. To raise or lower screen, place
hands on each side of the monitor and lift or lower to the desired height
(Figure RL.).
NOTE: Handle with care when raising or lowering the monitor screen.
Figure RL.
Screen Pivot
Before pivoting, the screen must be raised to the highest level to avoid
accidentally damaging the screen and to avoid pinching fingers. To
raise the screen, place hands on each side of the monitor and lift up to
highest position.
To pivot screen, place hands on each side of the monitor screen and
turn clockwise from Landscape to Portrait, or counter-clockwise from
Portrait to Landscape. (Figure R).
NOTE: To toggle the orientation of the OSM menu between Landscape
and Portrait modes, refer to the Controls section of this User's Manual.
Tilt and Swivel
Grasp both sides of the monitor
screen with your hands and adjust
the tilt and swivel as desired
(Figure TS.).
NOTE: Handle with care when tilting
and swiveling the monitor screen.
Figure R.
Display Setup
Figure TS.
7
- continued