NEC MultiSync LCD2470WNX User Manual page 7

7. Connect all cables to the appropriate connectors (Figure 8).
Using the USB cable, connect the B type connector to the USB
upstream port on the right side of the monitor and the A type con-
nector to the downstream port on the computer. If you can use the
cord from the USB device, use one of the downstream ports on
the side of the monitor. (Figure 9).
* NEC optional product attachment.
Do not use this connector unless specified.
Figure 8
8. Place the connector cover back on the monitor (Figure 0)
9. Place the attached cables into the specific hooks indicated, mak-
ing sure cables are resting flat against stand (Figure ).
0. Pivot the screen back to the original position. The tilt and height
of the monitor can be adjusted to user's preference (Figure 2).
Figure 0
Display Setup
VGA
DVI-D
DC-OUT*
AC-IN
Figure 
5
- continued
Figure 9
Figure 2