Display Setup
. Hold all cables firmly against the stand. Place the cable cover
back onto the stand (Figure 3).
2. Connect the power cord to the power outlet (Figure 4).
NOTE: If using this monitor at AC25-240V, please refer to
Recommended Use section of this manual for proper selection of
power cord.
3. Turn on the monitor using the front power button and turn on the
computer.
4. Analog input only: No-Touch Auto Adjust automatically adjusts
the monitor to optimal settings upon initial setup for most timings.
For further adjustments, use the following OSM
• Auto Adjust Contrast • Auto Adjust
Refer to the Controls section of this User 's Manual for a full
description of these OSM controls.
NOTE: For download information on the Windows
www.necdisplay.com.
NOTE: If you have any problems, please refer to the Troubleshooting
section of this User's Manual.
Figure 3
- continued
6
controls:
®
INF file visit
®
Figure 4
Power Button