Installation - Travis Industries 864 HO GS Installation Manual

56 Optional Equipment

Installation

WARNING: Make sure power to the fireplace has been shut off prior to installation.
NOTE: Refer to the wiring diagram on page 62 while making wiring harness connections.
1 Remove the concealment cove (see Figure 1).
2 Unscrew the four screws holding the control cover in place (see Figure 2). Carefully remove the
control cover (see Figure 3)
3 Unplug the ac adapter from the power harness (see Figure 4). You can leave the ac adapter
plugged into the wiring harness.
© Travis Industries
(for qualified installers only)
Figure 2
4100728
Figure 1
Figure 3
Figure 4
100-01254_000