Table of Contents
Advertisement
Fan
The fan sits atop the heat sink and is secured with two Torx screws.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the fan cable from the system board connector labeled CPUFAN (1).
4.
Remove the two Torx screws that secure the fan to the heat sink (2).
5.
Remove the fan from the heat sink (3).
To install the fan, reverse the removal procedure.
30
Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
(Access panel on page
18).
17).
Hide quick links:
Advertisement
Table of Contents
