Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP 24 All-in-One PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Notes
With a surface greater than 10 sq cm
MotherBoard, SSD Card, VGA PCB, RAM
All types including standard alkaline and lithium coin
or button style batteries RTC battery
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps LCD
Power Cord
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
4
1
1
1
Need help?
Do you have a question about the 24 All-in-One and is the answer not in the manual?
Questions and answers
How to open
To open the HP 24 All-in-One PC (model 24-f0066), follow these steps:
1. Remove Bottom Covers: There are two rubber covers at the bottom. Lift them out as they have small hooks underneath.
2. Remove Middle Cover: This piece can be tricky to remove. Use your fingernails or a pry tool to lift it from the middle.
3. Proceed with Disassembly: Once the covers are removed, you can access internal components for upgrades or repairs.
This answer is automatically generated