Removing The If Case, If Label; A, If Shade Sheet, And If Shade Cushion - Epson EMP-TW1000 Service Manual

4.2.9 Removing the IF Case, IF Label; A, IF Shade Sheet, and IF Shade
Cushion
1. Remove the two screws (C.B.SCREW, 3x8, F/ZI) that secure the IF Case, and remove the
IF Case from the MA-IF Board Assy.
2. Remove the IF Label; A from the IF Case.
3. Remove the IF Shade Sheet from the MA-IF Board Assy.
4. Remove the IF Shade Cushion from the MA-IF Board Assy.
Sheet, Shade, IF
3). Attach the IF Shade Cushions on the positions shown in Figure 4-21. Make
C A U T I O N
sure that the IF Shade Cushion is not overlapping the IC (Integrated
Circuit).
SEIKO EPSON
EMP-TW1000
Cushion, shade, IF
Figure 4-20.
IF Shade Cushions
IC
Figure 4-21.
4-24
Case IF
Label IF; A
C.B.SCREW, 3x8, F/ZI
Revision:A