Epson EMP-TW1000 Service Manual page 95

Handle with care! The FPCs of EMP-TW1000 are very thin and fragile. Do not
C A U T I O N
bend the FPCs forcibly. Since the ICs are mounted on the FPCs, strong bending
may cause the ICs to peel off or breaking of the FPCs.
If the heat-resistant tape on the FPC(s) comes off, replace it with new one.
When replacing the tape, align it following the standard as shown in Figure 4-
31.
heat-resistant tape
Attach the EMI Suppressor; A onto the outside of each FPC (R/G/B) as shown
in Figure 4-32.
FPC
SEIKO EPSON
EMP-TW1000
FPC
Light Valve
EMI Suppressor; A
Figure 4-31.
Figure 4-32.
4-33
30mm
standard line
Revision:A