Craftsman 320.37596 Operator's Manual page 7

This tool is intended for use on a circuit that has an outlet that looks like
the one illustrated in Sketch A in Figure 1. The tool has a grounding plug
that looks like the plug illustrated in Sketch A in Figure 1. A temporary adapter,
which looks like the adapter illustrated in Sketches B and C, may be used to
connect this plug to a 2-pole receptacle as shown in Sketch B if a properly
grounded outlet is not available. The temporary adapter should be used only
until a properly grounded outlet can be installed by a qualified electrician. The
green-colored rigid ear, lug, and the like, extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet box.
Fig. 1
(A)
Metal d_
Screw
Cover of Groun
"----- Outlet Box_ I
_j
(a)
Adapter unding_
Grounding Gro
(C) Pin _/
AA210
(D)
®
®
Keep guards in place and in working order.
Remove adjusting keys and wrenches. Form the habit of checking to see
that keys and adjusting wrenches are removed from the tool before turning
it on.
Keep the work area clean. Cluttered areas and benches
invite accidents.
= Don't use in dangerous environments. Don't use power tools in damp or wet
locations, or expose them to rain. Keep the work area well lighted.
= Keep children away. All visitors should be kept safe distance from the
work area.
Make the workshop child proof with padlocks, master switches, or by
removing starter keys.
37596 Manual_Revised_12 1211 Page 7