Craftsman 320.37596 Operator's Manual page 14

SeePartList(Page 12-13) f orhardware i llustrations r eferenced b y number i n
thefollowing instructions.
ATTACHING THE LEGS TO THE
TABLETOP
1. Place the router table
surface upside down on a
flat, level surface.
2. Position the legs relative
to the router table as shown
in Fig. 3.
3. Insert two pan-head bolts (15)
into the holes on the side of
each leg, and place the small
plain washers (17), spring
washers (16) and nuts (19), as
shown in Fig. 4.
4. Insert two pan-head
bolts (15) into the holes on
the top of each leg and
place the small plain washers
(17), spring washers (16), as
shown in Fig. 4.
5. Securely tighten all fasteners
with Philips screwdriver
(not supplied).
Fig. 3
Fig. 4
I
Page 14 37596 ManuaLRevised_12 1211