Craftsman 320.37596 Operator's Manual page 11

This Router Table has the following features:
1. Durable cast aluminum tabletop (26 in. x 14-1/8 in.) for a large, smooth and
durable work surface. Table height clearance is 12-1/2 in. to accommodate
most fixed and plunge-based touters.
2. 3-1/8 in router hole with 5 insert rings (1-1/4 in., 1-7/8 in., 2-1/8 in., 2-1/2 in.
openings; 1 blank plate).
3. 2 feather boards push blocks with mounting hardware that can be mounted
in slots on the fence and table.
4. Integrated safety switch with two outlets. To ensure safety and reliability,
the total current drawn on the two units must be less than 15 Amps.
5. Extended fence provides maximum workpiece support; the fence can be
moved forward and backward 3-3/4 in.
6. In-feed and out-feed fences can each be extended 2 in.
7. Out-feed fence can be adjusted as much as 1/2 in. forward of the in-feed
fence for joining operations.
8. Vacuum adapter fits a 2-1/4 in. shop vacuum hose (available separately).
9. Miter gauge adjusts from 0 ° to 60 ° in both directions for increased stability
in many difficult feed situations.
10. Fastening holes (11/32 in. dia.) allow the Router Table to be fixed to a stable
work surface.
11. Dust collection/guard reduces dust dispersal.
12. Above-the-table height adjustment: This table is provided with an above-
the-table adjustment hole to accommodate bit height adjustment on the
following Craftsman router models: 17541,2767, 27666, 2768, 27683,
27669, 27680, 17542, 28190, 28084. The bit height on the installed
router can be adjusted by turning the adjustment knob clockwise or
counterclockwise with a hex wrench (not included).
13. This router table is suitable for mounting the following Craftsman router
models: 17541,2767, 27666, 2768, 27683, 27669, 27680, 17542, 28190,
28084, 17540, 17543.
14. Two feather boards push blocks with mounting hardware that can be mounted in
slots on the fence and table.
37596 Manual_Revised_12 1211 Page 11