Advertisement
Available languages
Available languages
/on some
modes
_,, _ ,s _,,c_,_,o_'_
'_ ........... ,j;,s
Turning the Ice Maker
On/Off
NOTE: Do not force the wire shutoff arm up or down.
•
To turn the ice maker on, simply lower the wire shutoff arm.
NOTE: Your ice maker has an automatic
shutoff. As ice is
made, the ice cubes will fill the ice storage bin and the ice
cubes will raise the wire shutoff arm to the OFF (arm up)
position.
To manually turn off the ice maker, lift the wire shutoff arm
to the OFF (arm up) position and listen for the click to make
sure the ice maker will not continue to operate.
NOTE = Turn off the ice maker before removing the ice storage
bin to serve ice or to clean the bin. This will keep the ice cubes
from dropping
out of the ice maker and into the freezer
compartment.
After replacing the ice storage bin, turn on the ice
maker.
Ice Production Rate
In normal operation,
the ice maker should produce
approximately
8 to 12 batches of ice in a 24-hour
period.
If ice is not being made fast enough, adjust the controls.
•
Freezer Control - Turn the control dial to COLDEST.
•
Temperature Control - Turn the control dial gradually
toward COLDEST, waiting 24 hours between each increase.
Remember
Allow 24 hours to produce the first batch of ice. Allow
3 days to completely
fill the ice storage bin. Discard the first
three batches of ice produced.
The quality of your ice will be only as good as the quality of
the water supplied to your ice maker. Avoid connecting the
ice maker to a softened water supply. Water
softener
chemicals (such as salt) can damage
parts of the ice maker
and lead to poor quality ice. If a softened water supply
cannot be avoided, make sure the water softener is
operating
properly and is well maintained.
Do not store anything
on top of the ice maker or in the ice
storage bin.
REFRIGERATOR FEATURES
Your model
may have
some or all of these features.
important information to know about glass shelves
and
covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature
changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size
pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
The shelves in your refrigerator
are adjustable
to match your
individual
storage needs.
Storing similar food items together
in your refrigerator
and
adjusting the shelves to fit different
heights of items will make
finding the exact item you want easier. It will also reduce the
amount of time the refrigerator
door is open, and save energy.
Shelves and Glass Shelves (on some models)
To remove and replace a shelf:
1. Remove items from the shelf.
2. Slide the shelf straight out to the stop.
3. Depending on your model, lift back or front of the shelf past
the stop. Slide shelf out the rest of the way.
4. Replace the shelf by sliding the back of the shelf into the
track in the wall of the cabinet.
5. Guide the front of the shelf into the shelf track. Be sure to
slide the shelf in all the way.
(©;'ss<:,m®models)
To remove and replace the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer with one hand while supporting
bottom of drawer with other hand. Slide drawer out the rest
of the way.
3. Replace the drawer
by sliding it back in fully past the
drawer stop.
14
Advertisement
