MTU MW15406/17E Operating Instructions Manual page 86

LUBE OIL SYSTEM
Number of cylinders
Lube oil operating temperature before engine, from
Lube oil operating temperature before engine, to
Lube oil operating pressure before engine, from
Lube oil operating pressure before engine, to
Lube oil operating pressure, low idle (meas. point: before engine)
FUEL SYSTEM
Number of cylinders
Fuel pressure at supply connection to engine (when engine is starting), min.
Fuel pressure at supply connection to engine (when engine is running), min.
Fuel pressure at supply connection to engine (when engine is starting), max.
Fuel supply flow, max.
GENERAL OPERATING DATA
Number of cylinders
Firing speed, from
Firing speed, to
STARTING (electric)
Number of cylinders
Rated starter voltage (standard design)
INCLINATIONS, STANDARD OIL SYSTEM (relative to: waterline)
Number of cylinders
Longitudinal inclination continuous max. drive side down (Design: max. operat-
ing inclinations)
Longitudinal inclination temporary max. drive side down (Design: max. operat-
ing inclinations)
Longitudinal inclination continuous max. drive side up (Design: max. operating
inclinations)
Longitudinal inclination temporary max. drive side up (Design: max. operating
inclinations)
Transverse inclination continuous max. (Design: max. operating inclinations)
Transverse inclination temporary max. (Design: max. operating inclinations)
CAPACITIES
Number of cylinders
Engine oil capacity, initial filling (standard oil system) (Option: max. operating
inclinations)
Oil change quantity, max. (standard oil system) (Option: max. operating incli-
nations)
86 | Technical Data | MW15406/17E 2014-05
16
R °C 79
R °C 84
R bar 6.0
R bar 7.0
R bar 3.0
16
L bar -0.3
L bar -0.3
L bar +0.5
R liter/min 24
16
R rpm 100
R rpm 120
16
R V= 24
16
L degree 15
L degree 22.5
L degree 0
L degree 6
L degree 22.5
L degree 35
16
R liter 134
R liter 127