MTU MW15406/17E Operating Instructions Manual page 74

RAW-WATER CIRCUIT (open circuit)
Number of cylinders
Raw water pump: inlet pressure, min.
Raw water pump: inlet pressure, max.
Pressure loss in off-engine raw water system, max.
LUBE-OIL SYSTEM
Number of cylinders
Lube oil operating temperature before engine, from
Lube-oil operating temperature before engine, to
Lube-oil operating pressure before engine, from
Lube-oil operating pressure before engine, to
Lube oil operating pressure (low idle) (meas. point: before engine)
FUEL SYSTEM
Number of cylinders
Fuel pressure at engine inlet connection, min. (when engine is starting)
Fuel pressure at supply connection to engine, min. (when engine is running),
Fuel pressure at engine inlet connection, max. (when engine is starting)
Fuel supply flow, max.
GENERAL OPERATING DATA
Number of cylinders
Firing speed, from
Firing speed, to
STARTING (electric)
Number of cylinders
Rated starter voltage (standard design)
STARTING (with compressed air/hydraulic starter)
Number of cylinders
Starting air pressure before starter motor, min.
Starting air pressure before starter motor, max.
INCLINATIONS, STANDARD OIL SYSTEM (reference: waterline)
Number of cylinders
Longitudinal inclination, continuous max. driving end down (Option: max. oper-
ating inclinations)
Longitudinal inclination, temporary max. driving end down (Option: max. oper-
ating inclinations)
Longitudinal inclination, continuous max. driving end up (Option: max. operat-
ing inclinations)
74 | Technical Data | MW15406/17E 2014-05
12
L bar -0.4
L bar +0.5
L bar 0.7
12
R °C 75
R °C 80
R bar 7.5
R bar 8.5
R bar 3.5
12
L bar -0.3
L bar -0.3
L bar +0.5
R liter/min 2.5
12
R rpm 100
R rpm 120
12
R V= 24
12
R bar 21
R bar 30
12
L Degrees 15
(°)
L Degrees 22.5
(°)
L Degrees 5
(°)