MTU MW15406/17E Operating Instructions Manual page 194

9. Fit new O-ring (4).
10. Set on rotor cap (3), observe marks.
11. Fit washer (2).
12. Hold rotor (new design) with oil filter wrench and tighten nut (1) to specified torque using a torque
wrench.
Name
Nut
13. Hold rotor (old design) with oil filter wrench and tighten nut (1) to specified torque using a torque
wrench.
Name
Nut
14. Insert complete rotor (2) into the housing
and check for ease-of-movement.
15. Set housing cover (1) with new O-ring onto
lower section, observe marks.
16. Tighten nuts (3) crosswise and evenly.
194 | Task Description | MW15406/17E 2014-05
Size Type
M18 x 1.5 Tightening torque
Size Type
M16 x 1.5 Tightening torque
Lubricant Value/Standard
10 Nm
Lubricant Value/Standard
40 Nm to 50 Nm