Setting Cooling Temperatures - Frigidaire FGHS2355PF5A Use & Care Manual

exit
Togglesthe options and run
modes.
default While in the default option,
settings press and hold the set key
for three seconds to reset all
refrigerator settings to their
factory default settings.
light 0
quick ice
on off
Toggles dispenser light On
and Off.
Increases the production
of ice. Deactivates after 12
hours.
water
Press the "water" key
to select water. A green
indicator light will be
illuminated above the active
feature.
refrigerator
ternp
Allows the temperature
set-points to be adjusted.
Control temperatures range
from +33°F/+1°C to +47°F
/ +8°C.
crush Press the "crush" key
to select crushed ice. A
green indicator light will be
illuminated above the active
feature.
Setting cooling temperatures
mode
OF oC
water filter
Toggles display from
Fahrenheit to Celsius.
Displays the current status of
the water filter (Good, Order,
or Replace). To reset the filter
status to "Good', press and
hold the "set" key for three
seconds.
When you first power on the refrigerator, the
temperature displays 0°F and 37°F. After a
few seconds, both of the displays will switch
to "HI" The displays will continue to show
"HI" for 20 minutes. After 20 minutes, the
High Tamp alarm will sound and both
displays will show the actual temperature.
1 Plus (+) and Minus (-) indicators are
located on the right side of the control
panel.
2 Press the + or - indicator to adjust the
temperature to the desired setting.