1-10 Installing the GC-M2-U2-MiniSAS
Hardware Installation
Step 1:
Use a screw driver to unfasten the screw and nut from the motherboard.
Locate the proper mounting hole for the GC-M2-U2-MiniSAS and screw
the nut first. Then slide it into the connector at an angle.
Step 2:
Press the GC-M2-U2-MiniSAS down and then secure it with the screw.
Step 3:
Remove the protective cover from the SAS connector on the GC-M2-
U2-MiniSAS and connect one end of the SSD cable to the connector.
Step 4:
Connect the other end of the cable to the SSD to complete.
- 26 -