Gigabyte GA-Z170X-Gaming G1 Owner's Manual page 52

& VAXG Loadline Calibration
Allows you to set the Load-Line Calibration level for the CPU VAXG voltage. The levels are (from highest
to lowest): Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the CPU
VAXG voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically
configure this setting and sets the voltage following Intel's specifications. (Default: Auto)
& CPU Vcore Protection
Allows you to set the over-current protection level for the CPU Vcore voltage. The adjustable range is from
150.0mV to 400.0mV. Auto lets the BIOS automatically configure this setting. (Default: Auto)
& DDR CH(A/B) Voltage Protection
Allows you to set the over-current protection level for Channel A and Channel B memory voltage. The
adjustable range is from 200.0mV to 500.0mV. Auto lets the BIOS automatically configure this setting.
(Default: Auto)
& VAXG Protection
Allows you to set the over-current protection level for the CPU VAXG voltage. The adjustable range is from
150.0mV to 400.0mV. Auto lets the BIOS automatically configure this setting. (Default: Auto)
& CPU Vcore Current Protection
Allows you to set the over-current protection level for the CPU Vcore voltage.
Auto Lets the BIOS automatically configure this setting. (Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the CPU Vcore voltage.
& DDR CH(A/B) Current Protection
Allows you to set the over-current protection level for Channel A and Channel B memory voltage.
Auto Lets the BIOS automatically configure this setting. (Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the memory voltage.
& VAXG Current Protection
Allows you to set the over-current protection level for the CPU VAXG voltage.
Auto Lets the BIOS automatically configure this setting. (Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the memory voltage.
& DDR VPP CH(A/B) Current Protection
Allows you to set the over-current protection level for memory VPP memory voltage.
Auto Lets the BIOS automatically configure this setting. (Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the memory VPP voltage.
& CPU Vcore PWM Switch Rate
Allows you to set the PWM frequency for the CPU Vcore voltage. The adjustable range is from 300.0KHz
to 500.0KHz. (Default: Auto)
& DDR CH(A/B) PWM Switch Rate
Allows you to set the PWM frequency for Channel A and Channel B memory. The adjustable range is from
300.0KHz to 500.0KHz. (Default: Auto)
BIOS Setup - 52 -