Gigabyte GA-Z170X-Gaming G1 Owner's Manual page 22

USB Type-C Port
™
The reversible USB port supports the USB 3.1 specification and is compatible to the USB 3.0/2.0 specifica-
tion. Use this port for USB devices.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
Connection/
Connection/Speed LED:
Speed LED Activity LED
LAN Port
USB 3.0/2.0 Port (White)
The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.
Use this port for USB devices. Before using Q-Flash Plus, make sure to insert the USB flash drive
into this port first.
USB 3.1 Type-A Port (Red)
The USB 3.1 Type-A port supports the USB 3.1 specification and is compatible to the USB 3.0/2.0/1.1
specification. Use this port for USB devices.
Line In/Mic In
The line in/Mic in jack. Use this audio jack for line in devices such as optical drive, walkman, microphone, etc.
Line Out
The line out jack. Use this audio jack for a 2-channel speaker. This jack can be used to connect front
speakers in a 5.1-channel audio configuration.
Optical S/PDIF Out Connector
This connector provides digital audio out to an external audio system that supports digital optical audio.
Before using this feature, ensure that your audio system provides an optical digital audio in connector.
Center/Subwoofer Speaker Out
Use this audio jack to connect center/subwoofer speakers in a 5.1-channel audio configuration.
Rear Speaker Out
Use this audio jack to connect rear speakers in a 5.1-channel audio configuration.
Headphone/Speaker Out
This audio output jack supports audio amplifying function. For better sound quality, it is recommended that
you connect your headphone/speaker to this jack.
Refer to the instructions on setting up a 2/5.1-channel audio configuration in Chapter 6, "Configuring
2/5.1-Channel Audio."
(Note) The USB flash drive used must be a USB 2.0 flash drive.
Hardware Installation
State Description
Orange 1 Gbps data rate
Green 100 Mbps data rate
Off 10 Mbps data rate
- 22 -
Activity LED:
State Description
Blinking Data transmission or receiving is occurring
Off No data transmission or receiving is occurring
(Note)