Gigabyte GA-Z170X-Gaming G1 Owner's Manual page 49

& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Frequency (MHz)
The first memory frequency value is the normal operating frequency of the memory being used; the second
is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.
` Advanced Memory Settings
& Extreme Memory Profile (X.M.P.)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& Memory Boot Mode
(Note)
Provides memory detection and training methods.
Auto Lets the BIOS automatically configure this setting. (Default)
S kip memory detection and training in some specific criteria for faster memory
Enable Fast Boot
boot.
Disable Fast Boot Detect and train memory at every single boot.
& Memory Enhancement Settings
Provides three different memory performance enhancement settings: Normal (basic performance), Enhanced
Stability, and Enhanced Performance. (Default: Normal)
& Memory Timing Mode
Manual and Advanced Manual allows the Memory Multiplier Tweaker, Channel Interleaving, Rank
Interleaving, and memory timing settings below to be configurable. Options are: Auto (default), Manual,
Advanced Manual.
(Note) This item is present only when you install a CPU and a memory module that support this feature.
, System Memory Multiplier, Memory Frequency(MHz)
(Note)
- 49 - BIOS Setup