Appendix; Message Codes - Leica DISTO D3a BT User Instructions

D
The direction keys
GB Eight direction keys (identified by a small arrow near
the key) on the operator's keypad are used to
F
manoeuvre the cursor. The direction keys become
I
active when you switch to the second level (by
pressing the
E
active in both levels. The functionality of the direction
P
keys depends on the software used.
NL
Transmitting the measurement
DK
If your software supports the direction keys use them
S
to select the appropriate position for the cursor.
Press the button briefly to transfer the value
N
from the summary row to the pocket PC / PC.
FIN
Press the botton long to transfer all values from
J
the display.
For further details please consult your manual for the
CN
software used.
ROK
PL During data transmission
If the data is not confirmed as being successfully
H
received by the Pocket PC/ PC then no new measure-
RUS
ment can be processed. The Info code "240" appears
CZ in the display if no data transmission has taken place
after 2 seconds. Press the

Appendix

key). The distance measuring key is
- key and repeat
the measurement and then transmit it.
The free software supplied is designed to
provide the user with basic functionality. Leica
Geosystems provides no warranty for this free soft-
ware and offers no support for it. Leica Geosystems
accepts no liability whatsoever arising from the use
of the free software and is not obliged to provide
corrections nor to develop updates or upgrades.
You can find numerous commercial vendors of soft-
ware for a wide range of applications on our
homepage.
Appendix

Message codes

All message codes are displayed with either
"Error". The following errors can be corrected:
Cause
156
Transverse tilt
greater than 10°
160
Main tilt direction,
angle too high
(> 45°)
204
Calculation error
240
Data transfer error
Leica DISTO™ D3a BT 776750 gb
20
or
Remedy
Hold the instrument
without any transverse
tilt
Measure angle up to
max. ± 45°
Repeat procedure
Repeat procedure