OWC Mercury Elite Pro mini Assembly Manual & User Manual page 8
Portable
Hide thumbs
Also See for Mercury Elite Pro mini:
- Assembly manual (28 pages) ,
- Assembly manual & user manual (24 pages) ,
- Quick start manual (10 pages)
Table of Contents
Advertisement
5. Place your drive in the inner chassis as shown below. Press the drive toward the rear
of the inner chassis to make sure that the drive is fully seated in the SATA connector.
6. Use one hand to hold the drive down, then turn over the inner chassis. There are four
screw holes on the bottom of the inner chassis (circled in red below).
OWC MERCURY ELITE PRO MINI
6
DEvICE SETUP
Advertisement
Table of Contents
Need help?
Do you have a question about the Mercury Elite Pro mini and is the answer not in the manual?