OWC Mercury Elite Pro mini Assembly Manual & User Manual page 5

IMPORTANT:
• The Mercury Elite Pro mini is designed to receive all needed power
through the USB or FireWire cable, therefore a separate power adapter is
not necessary and not included. For the few situations in which external
power may be necessary, an optional 5V power adapter is available at:
http://eshop.macsales.com/item/owc/motgpwr/
• If the Mercury Elite Pro mini is daisy-chained to another FireWire device
instead of being connected directly to a computer, you must use the
optional 5V power adapter. Attempting to bus-power the Mercury Elite
Pro mini using the FireWire port of another device could cause damage
to one or both devices and should not be attempted.
• Even when the optional v5V power adapter is not connected, the on/
off switch must be in the "on" position to use the Mercury Elite Pro mini.
• Only one interface (USB, FireWire, or eSATA) at a time can be used.
• For the safe removal of your drive and to assure that no data is lost, always
eject or unmount the drive from your OS before powering off.
OWC MERCURY ELITE PRO MINI
3
INTRODUCTION