Side Handle - Makita HR5000 003101 Instruction Manual

1
2
1. Clamp nut

2. Side handle

1
1. Side grip
1. Tool holder
2. Tool retainer
37 27
19
19
A
Side handle
Raise the side handle. The side handle can be secured in
003140
four position (right, left, up and down). To secure the side
handle, tighten the clamp nut securely. Never secure the side
handle in other than the above four positions.
Side grip
003148
The side grip is convenient for downward drilling or chipping
operations. Screw the side grip on the tool securely. The side
grip can be installed on either side of the tool for right or left
hand operation.
Installing or removing the bit
003152
Insert the bit into the tool holder as far as it will go. Pull out
1
and turn the tool retainer 180 degrees. Then release it to
2
secure the bit.
180
003155
CAUTION:
• Never use A-type shank bits. They can cause damage to
the tool.
38.5 37
16ø
To remove the bit, follow the installation procedure in reverse.
B
7