Download Print this page

Makita HR5000 003101 Instruction Manual

50 mm (2”)
Hide thumbs

Advertisement

Rotary Hammer
50 mm (2")
MODEL HR5000
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
w w w . m a k i t a t o o l s . c o m
DOUBLE
INSULATION
M A N U A L
003101

Advertisement

loading

  Also See for Makita HR5000 003101

  Related Manuals for Makita HR5000 003101

  Summary of Contents for Makita HR5000 003101

  • Page 1 Rotary Hammer 50 mm (2”) MODEL HR5000 I N S T R U C T I O N WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. w w w . m a k i t a t o o l s . c o m DOUBLE INSULATION M A N U A L...
  • Page 2: Specifications

    SPECIFICATIONS Capacities No load speed (RPM) Blows per minute Overall length Net weight • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
  • Page 3: Personal Safety

    trician to install a polarized outlet. Do not change the plug in any way. Double insula- tion eliminates the need for the three wire grounded power cord and grounded power supply system. 5. Avoid body contact with grounded sur- faces such as pipes, radiators, ranges and refrigerators.
  • Page 4: Specific Safety Rules

    model. Accessories that may be suitable for one tool, may become hazardous when used on another tool. SERVICE 23. Tool service must be performed only by qualified repair personnel. Service or main- USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw.
  • Page 5 5. Under normal operation, the tool is designed produce screws can come loose easily, causing a breakdown or accident. Check tightness of screws carefully before operation. 6. In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load.
  • Page 6: Functional Description

    FUNCTIONAL DESCRIPTION 003111 1. Switch trigger 003127 1. Change lever 2. For hammering only 3. For rotation with hammering ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
  • Page 7: Side Handle

    003140 1. Clamp nut 2. Side handle 003148 1. Side grip 003152 1. Tool holder 2. Tool retainer 003155 38.5 Side handle Raise the side handle. The side handle can be secured in four position (right, left, up and down). To secure the side handle, tighten the clamp nut securely.
  • Page 8: Operation

    OPERATION 003202 002449 1. Blow-out bulb 003208 Hammer drilling operation Set the change lever to the Position the bit at the desired location for the hole, then pull the switch trigger. Do not force the tool. Light pressure gives best results. Keep the tool in position and prevent it from slip- ping away from the hole.
  • Page 9 003209 1. Core bit 2. Adapter 003210 1. Center bit 003212 003214 003215 1. Rod Core bit (optional accessory) When using the center bit Screw the core bit on the adapter. Install the adapter with the core bit in the tool in the same manner as a drill bit. Install the center bit.
  • Page 10: Maintenance

    003216 1. Core bit 2. Adapter 003212 MAINTENANCE 001146 1. Commutator 2. Insulating tip 3. Carbon brush When not using the center bit Screw the core bit on the adapter. Install the adapter with the core bit in the tool in the same manner as a drill bit. Rotate the change lever to the on the concrete and turn the tool on.
  • Page 11 Run the tool for several minutes to warm it up. Switch off and unplug the tool. Remove the crank cap using a Makita lock nut wrench 35 (optional accessory). Rest the tool on the table with the bit end pointing upwards. This will allow the old grease to collect inside the crank housing.
  • Page 12 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 13 First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold...
  • Page 14 Paste 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog 4. Most favored points are: Design Features Size Price Makita Brand MODEL NO. YEAR SERIAL NO. PHONE 20-29 30-39 40-49 Paste Paste Radio Exhibition...
  • Page 15: Factory Service Centers

    Date Purchased When you need service: Send complete tool (prepaid) to one Dealer’s Name & Address of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a letter to the outside of Model No.
  • Page 16 MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.