Specifications; General Safety Rules - Makita HR5000 003101 Instruction Manual

SPECIFICATIONS

Capacities
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.

GENERAL SAFETY RULES

(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all
instructions listed below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep your work area clean and well lit.
Cluttered benches and dark areas invite acci-
dents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust
or fumes.
2
Model
Carbide-tipped bit
Core bit
No load speed (RPM)
Blows per minute
Overall length
Net weight
Concrete
Hume pipe
3. Keep bystanders, children, and visitors
away while operating a power tool. Distrac-
tions can cause you to lose control.
Electrical Safety
4. Double insulated tools are equipped with
a polarized plug (one blade is wider than
the other.) This plug will fit in a polarized
outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified elec-
HR5000
50 mm (2")
150 mm (5-7/8")
255 mm (10")
260/min.
2,100
476 mm (18-3/4")
9.6 kg (21.1 lbs)
USA002-2