Makita HR5000 003101 Instruction Manual page 12

ACCESSORIES
12
CAUTION:
• Do not tighten the crank cap excessively. It is made of
resin and is subject to breakage.
To maintain product SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
CAUTION:
• These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
• Spline shank Carbide-tipped bits
• Bull point
• Cold chisel
• Scaling chisel
• Clay spade
• Grooving chisel
• Rammer
• Bushing tool
• Spline shank to A-Taper adapter
• Spline shank to SDS adapter
• Core bit
• Core bit adapter
• Hammer grease
• Bit grease
• Side handle
• Side grip
• Blow-out bulb
• Safety goggles
• Lock nut wrench 35
• Plastic carrying case