Table of Contents
Advertisement
Taking care of your machine
Cleaning the separator and pre-motor filter
CAUTION: For best cleaning results filters require cleaning every 4-6 uses or as needed.
Do not use your handheld cleaner without the filter in place.
Tap separator over
a bin allowing
dirt/debris to fall out.
Refit the pre-motor filter
and separator.
Let's talk technical
Cleaning terminals
Pull the filter tab
to remove the pre-motor
filter from the separator.
Replace filters every 6-9 months.
Using a dry cloth or soft
dusting brush remove any
dust/debris from
terminals on battery
charger, battery and
handheld cleaner.
40˚C
40˚C
MAX
MAX
Tap the filter over
a bin to remove any
dirt/debris. Wash the
filter under running
water (40 degrees max).
24hr
24hr
Leave for 24hrs
or until fully dry
before replacing.
Advertisement
Table of Contents
