Vax VX58 Let's Get Started

Vax VX58 Let's Get Started

Cordless slimvac with detachable handheld

Advertisement

CORDLESS
SlimVac
CORDLESS SLIMVAC WITH
DETACHABLE HANDHELD
LET'S GET STARTED.
VX58

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VX58 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vax VX58

  • Page 1 CORDLESS SlimVac CORDLESS SLIMVAC WITH DETACHABLE HANDHELD LET’S GET STARTED. VX58...
  • Page 2: Let's Talk Safety

    Let’s talk safety This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. READ ALL THE INSTRUCTIONS BEFORE USING THIS APPLIANCE • It is a battery-operated appliance, the battery being charged whilst inside the appliance. Basic •...
  • Page 3 CAUTION: The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat or incinerate. Replace battery with Vax battery only. Use of another battery may present a risk of fire or explosion. Dispose of used battery promptly. Keep away from children.
  • Page 4 Maintaining your carpets and hard fl oors will ensure they keep their appearance for longer and Vax will help you take good care of them. Taking care of your Cordless SlimVac Also inside this guide are instructions on maintaining your new machine, so that it’s ready when you are to tackle your carpets and hard fl oors.
  • Page 5: Table Of Contents

    Contents Let’s talk safety Cordless SlimVac Included with Getting to know your machine your machine Getting started 3-in-1 Tool Using your machine Taking care of your machine Let’s talk technical Accessories Notes What to do if it goes wrong Getting in touch Model comes with a charger, battery, wall mount, 2 wall plugs, 2 screws and user guide.
  • Page 6: Getting To Know Your Machine

    Run time 20 minutes Voltage 18V Output 22.0V 300mA Charge time 8 hours Rating 2.0Ah 36Wh Use with Vax Li-ion Battery BTTV1B2 ONLY Weight 2 kg Use with Vax model YLJXA - A220030 Charger ONLY Dust bin capacity 0.4L Accessories & Consumables Filter Pack VX50F Subject to technical change without notice.
  • Page 7: Getting Started

    Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Before you begin CAUTION: Always switch off the vacuum cleaner before connecting or disconnecting the handheld/attachments or removing and emptying the dirt container. IMPORTANT: The vacuum cleaner is equipped with overheat protection. If for any reason the vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner off .
  • Page 8 Getting started Fixing the wall bracket Fully assemble the Attach the wall bracket With the wall bracket Holding the wall bracket vacuum but do not to the handle. attached, stand the firmly in place, carefully attach the battery. vacuum close to the wall, remove the vacuum.
  • Page 9 (60° C/140°F) or incinerate. Replace battery with Vax battery only. Use of another battery may present a risk of fi re or explosion. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not dispose of in a fi re. Do not attempt to disassemble the battery or remove any component projecting from the battery terminals.
  • Page 10: Charging The Battery

    Getting started Charging the battery CAUTION: Do not use the vacuum cleaner when the machine is plugged in and charging. CAUTION: For best performance the terminals on the battery and vacuum cleaner must be clean and free from dust and dirt. The life expectancy of the battery will vary depending on the usage of the vacuum cleaner. The On/Off and charging light will illuminate continuously whilst the charger is connected.
  • Page 11: Using Your Machine

    Using your machine CAUTION: This vacuum cleaner has a constantly rotating brushbar when the brushbar ‘ON’ is selected. Never leave the vacuum cleaner in one spot for an extended period of time as this may damage the fl oor surface. The brushbar should be ON for carpets and OFF for hard fl oors.
  • Page 12 Using your machine Using as a handheld vacuum cleaner Always take extra care when using the vacuum cleaner on the stairs. Press the handheld The reach wand when Choose an accessory Push the chosen release clip. Pull to attached to the Powered (pictures illustrated accessory into the separate the handheld...
  • Page 13 Using your machine Using as a reach slim vacuum cleaner The reach wand can be used for hard to reach places. Press the Power Head/ Choose an accessory Push the chosen Squeeze the trigger accessory release clip (pictures illustrated accessory into the located underneath the and pull to remove the dependent upon model).
  • Page 14: Taking Care Of Your Machine

    Taking care of your machine Removing the battery CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance or troubleshooting checks. Lie the handheld on Slide the battery out from its side on a fl at stable the back of the handheld. surface.
  • Page 15 Taking care of your machine Cleaning the post-motor fi lter CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance or troubleshooting checks. For continuous best performance the fi lter requires cleaning every 3 months and should be replaced every 6 months depending upon use.
  • Page 16 Taking care of your machine Cleaning the fi lter and separator Tap the mesh fi lter and separator over a bin to remove any dirt/ debris. Using a dry cloth wipe away any remaining dirt/debris. Refi tting the separator, fi lter and dirt container CAUTION: Incorrect fi tting of the separator and fi lter will reduce suction.
  • Page 17: Let's Talk Technical

    Let’s talk technical IMPORTANT: If the brushbar has been obstructed, the Motor Protection Sensor may have been activated and the brushbar will seize. Remove battery pack, then remove the Powered Head from the machine and clear any obstruction. Refi t the Power head, the battery and the switch on the vacuum cleaner by pressing the trigger and press the brushbar on/off button.
  • Page 18: Accessories

    Accessories Also available SlimVac Tools Visit www.vax.com.au Refer to ‘using your machine’ section for tool assembly instructions. Reach mode tools 3-in-1 Tool The multi functional 3 in 1 tool is ideal for use all around the home without having to switch between tools. It’s perfect for those tricky corners and crevices, great for upholsteries such as;...
  • Page 19: Notes

    Notes...
  • Page 20 Notes...
  • Page 21 Notes...
  • Page 22: What To Do If It Goes Wrong

    What to do if it goes wrong Problem Solution • Check the contents panel on the box to make sure the part is included with your vacuum cleaner. Is there an accessory missing? • Check the battery is inserted correctly into the vacuum cleaner. •...
  • Page 23: Getting In Touch

    Getting in touch * Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
  • Page 24 Distributed by Techtronic Industries Australia Pty. Ltd. 31 Gilby Road, Mt Waverley, VIC 3149 Australia. Careline AU: 1300 361 505 www.vax.com.au Careline NZ: 0800 800 900 www.vax.co.nz...

Table of Contents