Seats; Back Gate And Side Gates Of Truck Bed - Zap Zaptruck-XL 2009 Owner's And Operator's Manual

-XL
TM
Introduction of Devices and Control Mechanism

3. Seats

1.FRONT SEATS
Fold up and lift seats by adjusting the handle to
the direction as shown in the figure to fold
seatback forwards
WARNING!
Do not attempt to change seatback position
while driving.
Lift latch handle up as in Fig.1 to open the seat.
Lift the cushion up,pin on the hook of base plate
of seat with assist strap to fix the seat as in Fig. 2,
so that it is convenient to service and adjust the
motor.
Fig. 1
Fig. 2
18
Owner and Operator's Manual

4. Back Gate and Side Gates of Truck Bed

1.BACK GATE
Lowering
Undo clasp of the gate hook,
lower the rear gate. Never
drive when rear gate is open,
because it will cover the rear
combination light. Rear gate
should be removed when
transporting long cargo.
Removing
Remove the left bolt on rear
gate, then slightly lift the rear
gate and push to left to
remove it.