Introduction Of Devices And Control Mechanism - Zap Zaptruck-XL 2009 Owner's And Operator's Manual

-XL
TM

Introduction of Devices and Control Mechanism

1. Ignition Switch and Steering Lock
The ignition switch has four positions:
LOCK
This is the normal parking position; the key can
be pulled out only in this position.The steering
column can be raised only after removing the
key.
Insert the key and
turn to another
position clockwise
so that the steering
column is unlocked.
If it is hard to turn
the key, please turn
the steering wheel
left and right as you
turn the key.
ACC
Turn the key to this position to supply power to
the radio cassette player, cigarette lighter and
other accessories.
ON
When the key is turned to this position, all
power supplies of the vehicle are switched on
and the engine is ready to start.
START
When the key is turned to this position, the
motor starts. Release the key, it will return to
"ON" automatically.
Warning!
Never pull out the key during vehicle
movement, or the steering column will be
locked up and the vehicle will be out of
control.
Never leave the key in an unattended vehicle
or leave it with children alone in the vehicle.
2.Combination Switch
Lights Switch
Turn the handle to switch headlights and
markers on or off. There are four control
positions.
OFF
Position- All lights off.
Position- Position light, license plate
light and panel light on.
Position- Position light and head light on.
P
Position- Outer parking light on.
12
Owner and Operator's Manual
Turn Signal Lamp Switch
As shown in the picture, when pushing up the
switch clockwise, the right turn signal light is on;
(down)counter clockwise, the left turn signal
light is on. (The ignition switch needs to be in
"ON" position.)
Headl ight Changing Switch - high and low beam
(When switching forward and back )
With the head light on,depress the control lever
forward to shift into high beam,pull back to shift
into low beam.When the high beam is on,one of
the indicating lights on the combination
instrument will be switched on.