Dispenser Trim - GE ZISS480DRHSS Installation Instructions Manual

Design Guide
DISPENSER TRIM FIT EXAMPLES:
(NOT TO SCALE)
3/4" OVERLAY PANEL
(Flush Installation Only)
, The dispenser trim fits over the
custom panel and snaps into the
freezer door,
1/4" FRAMED PANEL
(Standard Installation
Only)
, The dispenser trim fits over the
custom panel and snaps into the
freezer door,
, The clips will not engage the door
if the panel is more than 0,250" thick,
, If the panel is less than 0,250" thick,
a noticeable gap may be created
around the dispenser trim,
3/4" OVERLAY PANEL
(Standard Installation
Only)
, The dispenser trim fits over the
custom panel and snaps into the
freezer door,
, The clips will not engage the door
if the panel is more than 1,100" thick,
, If the panel is less than 1,100" thick,
a noticeable gap may be created
around the dispenser trim,
1/4"
Framed
1/4" Backer Panel
.10" Spacer
FREEZERDOOR
3/4" Overlay Dispenser Trim (Flush Install)
FREEZERDOOR
0.250"
Thick
1/4" Dispenser Trim (Semi-Flush Install)
FREEZERDOOR
1,100"
Total Thickness
3/4" Overlay Dispenser Trim (Semi-Flush Install)
12