Important Note; Dispenser Trim - GE Profile PSB42LGR Dimensions And Installation Information

PSB48YGX
GE Profile 48" Built-In Side-By-Side Refrigerator with Dispenser
™
1/4" Framed Panel Dimensions
If you choose to install framed panels, they must be cut to the dimensions
shown. The panels will slide into the frame on the door and grille.

ImPORTaNT NOTE:

5/16"
Trim
Maximum weight for Fresh Food panel is
Door
Reveal
70 pounds and 30 pounds total for Freezer
panels.
1/4"
Panel
ImPORTaNT NOTE:
A

Dispenser Trim

Grille Panel
B
The refrigerator is supplied with factory installed
dispenser trim.
F
• If panel is less than 1/4" thick, a noticeable gap will
Dispenser
be created around the dispenser trim. Foam tape
Cutout
may be applied on the door to improve the fit.
• If panel is more than 1/4" thick, the panel will not fit
C
behind the trim.
G 1/4" Front Panel Dimensions (in inches)
Freezer Fresh Food
Panel Panel
48" Models 45-31/32 10-3/4 67-7/8 18-15/32 26-15/32 17-5/8 35-5/32
D E
For answers to your Monogram, GE Profile
®
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center
®
800.626.2000.
a b C
or
™
service,
3/4" Custom Panel Dimensions
For a more custom appearance, 3/4" framed custom panels may be installed on
trimmed models. The overlay panel is secured to a 1/4" finished backer panel.
The custom panel then slides into the trim. Please see installation instructions
for detailed information.
Door
1/4"
Backer
Panel
D E F G
3/4"
Custom
Panel
.250 + .750 = 1.000 Maximum Total Panel Thickness
3/4"
Custom Panel
Backer Panel
NOTE: Left-to-right offset is not always
equal to top-to-bottom offset.
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers'
standards.
Specification Revised 6/09
Listed by
Underwriters
Laboratories
210379