Installing The Reversible Shredding Disc Or French Fry Disc; Installing The Multipurpose Blade Or Dough Blade - KitchenAid KFP0924 Instructions Manual

aSSEMblINg ThE FOOd PROCESSOR
Installing the r_ever_sible shr_edding disc or_ fr_ench fr_y disc
Hold the french fry disc or reversible
1
shredding disc by the 2 finger grips with
the desired shredding side facing UP .
Insert the disc adapter into the hole in
the bottom of the disc.
TIP: You may need to turn the disc/adapter until it drops down into place.
Install the work bowl cover, being sure
3
it locks into place.
Installing the multipur_pose blade or_ dough blade
IMPORTaNT: The multipurpose blade and dough blade can only be used with
the work bowl.
Place the blade on the power shaft.
1
Rotate the blade so it falls into place on
the power shaft.
10
Finger_ gr_ip
2
2
With the work bowl installed, slide the
drive adapter onto the power shaft.
Push to lock: Press down firmly on the
multipurpose blade until it is down as
far as it will go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.
Finger_ gr_ip